Image activities | ||
Back to index page | ||
Next image | ||
Previous image | ||
Information | ||
03_Torx Bolts.jpg | ||
JPEG | ||
Resolution: 2592×1944 | ||
File size: 2459827 bytes | ||
Date: 7/10/06 5:29 PM | ||
Flash: Flash did not fire, auto | ||
Focal length: 6.0mm | ||
Exposure time: 1/160s | ||
Aperture: 4.0 | ||
Metering mode: Center weighted average | ||
Camera: Canon | ||
Model: Canon PowerShot S2 IS | ||
Sensor type: OneChipColorArea | ||
The Torx bolts had some white corrosion products in the threads near the bolt heads. It's been cleaned away with a wire brush in this picture. Also seen in the threads was a brittle yellow substance which fell off when I cleaned the bolts. I decided this substance was a thread locking compound (which explains why the bolts had so much drag when I removed them), so used some Loctite when I re-installed the switch.